|
 |
|
 |
|
 |
All images must be used to work in CMYK color mode. |
|
|
All images must be more than 300dpi. |
|
|
All fonts must be outlined. |
|
|
If there is error on your files, you must resend modified new files. |
|
|
If you want to modify or cancel your files, must contact to our representative. |
|
|
If you use too dark color for non-coating business card, the set off error can be occurring. |
|
|
There is color difference between printing and monitor because of the color representation cannot appear in the same color. |
|
|
There is a difference color of the front and back depending on paper, coating and 8 degrees of colors. |
|
|
Color consistence must over 5%. (Less than 5%, the color may not appear or disappear.) |
|
|
Even if you use same files, the color may be a little different each times. |
|
|
Darker (+5%) or lighter (-5%) than previous job cannot be reworked. You should admit ± 5% color variation. |
|
|
If you choose 4 color degrees for spot color or similar 3 color degrees, the color cannot print as your desired color. |
|
|
If you choose K 100% for dark black the set off error occur. We recommend c60m40y40k100 for Dark black. |
|
|
If you design Black(K100) on the other colors, color come out over printed. |
|
|
If you choose dark color with laminating, the bubbles may enter between paper and film. |
|
|
If there are same white margin after cutting, cutting may not same as your design. (Cutting variation is ±1mm) |
|
